以催化油浆窄馏分为添加剂的Al－MCM－41分子筛的合成

 采用阳离子表面活性剂十六烷基三甲基溴化铵为模板剂，以正硅酸乙酯为硅源，以硫酸铝为铝源，水热合成了以催化油浆窄馏分为添加剂的高比表面积Al－MCM－41介孔分子筛，并利用XRD，HREM，TG－DTA及N2吸附－脱附等测试手段对合成样品进行了表征．合成的Al－MCM－41分子筛的比表面积和孔体积分别达到1295m2／g和1．5cm3／g，其平均孔径为4．3nm．重点研究了Al－MCM－41分子筛结晶度、晶胞参数、比表面积、孔体积及平均孔径等结构性质随催化油浆窄馏分添加量及其组成的变化规律，并从合成机理上进行了解释．     

Study of the Crystallization of an Aromatic Poly-ether-ketone (PK99) by Calorimetric and X-ray Analysis

An analysis of the crystallization behaviour of a new poly(aryl-ether-ether-ketone-ketone), PK99, by differential scanning calorimetry (DSC) and wide-angle X-ray diffraction (WAXD) is presented. Isothermal crystallization TG were obtained in the whole range between the glass transition temperature (T _g) and the melting temperature (T _m) as a consequence of the slow crystallization kinetics stemming from the closeness of these transitions. The calorimetric results, compared with WAXD data, were applied to determine the theoretical melting temperature and crystallization enthalpy. The DSC and WAXD data were combined in order to calculate the total amount of the crystallizable fraction of the polymer, and a model was proposed to explain the difference between the fractions of crystallinity observed with these techniques. The thermal and X-ray data were also correlated with different lamellar morphologies arising from the crystallization conditions. Finally, DSC experiments on the crystallized sample were used to detect the presence of a rigid amorphous phase which does not relax at T _g. This revised version was published online in July 2006 with corrections to the Cover Date.     

Solvent effect of ionic liquids on the distribution constant of 2-thenoyltrifluoroacetone and its nickel(II) and copper(II) chelates and the evaluation of the solvent properties based on the regular solution theory

Distribution constants of 2-thenoyltrifluoroacetone (Htta) and its Ni(II)and Cu(II) chelates between 1-alkyl-3-methylimidazolium bis(trifluoromethanesulfonyl)imide (C_nmimTf₂N; n = 4, 6, and 8) as ionic liquid (IL) and an aqueous phase were determined. The enol fraction of Htta in ILs was spectrophotometrically measured to calculate the distribution constant of the enol form (K_D,HE) of Htta. The K_D,HE values in ILs were evaluated by comparing those in various molecular solvents such as alkanes, aromatic hydrocarbons, chlorohydrocarbons, ethers, ketones, and esters previously reported on the basis of the regular solution theory (RST). It was elucidated that the IL solutions of Htta (enol) can be taken as apparently regular solutions as expected in the organic solvents. On the other hand, the effect of ILs on the distribution constant of metal(II) chelates (K_D,M) was fairly complicated. The Cu(tta)₂-IL solutions behaved like the alkane and aromatic hydrocarbon solutions but the Ni(tta)₂-IL (C₄mimTf₂N) like ether and ketone solutions. In the Ni(II) case, some specific interactions between the Ni(II) chelate and IL was suggested. Finally, the solubility parameters of ILs were calculated using K_D,HE by RST and were in good agreement with the literature values obtained by the enthalpy of vaporization.     

聚丙烯/聚乙烯共混物的辐射凝胶生成动力学研究

本文研究辐照PP/HDPE共混物的溶胶生成分数s与辐照剂量R的关系,结果表明适用于某些纯聚合物辐射交联规律的Charlesby-Pinner关系式和陈-刘-唐关系式皆不适用于PP/HDPE共混体系。张万喜等人曾研究过许多纯聚合物的辐射交联,提出裂解度正比于R~β的假定,β是与高分子结构相关的参数,这个假定可与大多数聚合物的辐射交联实验数据符合。同样的假定被应用于本文的共混体系,不同的是根据共混物结构特点对R~β项进行了必要的修正,即共混物的R~β=∑f_iR~(βI),其中f_i,β_i分别为共混物第i组分的重量分数及β值。用修正后的R~β处理辐照PP/HDPE共混物的实验数据,R(s+√s)～R~β,有很好的线性关系。     

计量置换参数Z值分量的测定(英文)

 以计量置换吸附理论(SDT A)为基础,从理论上推导出计量吸附模型中表征溶质对固定相亲合势大小的参数βa值与流动相中强置换剂浓度的对数呈线性关系。计量置换模型中的参数n和q(n和q分别代表1摩尔溶剂化溶质被吸附时,从吸附剂表面和从溶质分子表面所释放出的溶剂的物质的量)是计量置换参数Z值的分量,是两个非常有用的参数,可以从这个定量关系中直接获得。推导出的方程用苯的衍生物进行了实验验证,获得了较满意的结果。将这种方法计算得到的分量值与SDT A与计量置换保留模型(SDT R)相结合的方法得到的分量值进行了比较。     

An investigation of heparinase immobilization

A systematic investigation of the parameters that affect the efficiency of immobilizing heparinase onto cyanogen bromide activated crosslinked 8% agarose beads was conducted. Two experimental measures, the “fraction bound” and the “fraction retained,” were used to monitor the coupling efficiency. The fraction bound is the portion of the total initial enzyme that is bound to the agarose gel. The fraction retained is the fraction of bound enzyme that is active. The product of the two measures indicates the coupling efficiency. The activity of the immobilized heparinase was measured under conditions free of both internal and external mass transfer limitations, and thus, the fraction retained represents the true immobilized enzyme activity. Increasing the degree of activation of the beads results in an increase in the fraction bound, the fraction retained, and consequently, the coupling efficiency. As the ratio of enzyme solution to gel volume increases from 1.5 to 2.2, the fraction bound remains constant but the fraction retained decreases (heparinase concentration; 0.15 mg/mL and degree of activation; 9.5 μmol of cyanate esters/g of gel). At volume ratios greater than 2.2, both the fraction bound and the fraction retained decline continuously. Changing the heparinase concentration in the coupling solution changes the coupling efficiency in a manner similar to that of the volume ratio change. When heparin is added during the coupling process, the fraction bound declines as the heparin concentration increases, whereas the fraction retained increases up to a heparin concentration of 12 mg/mL and decreases thereafter. When arginine, lysine, and glycine are used to block the unreacted cyanate ester groups after the coupling process, the immobilized heparinase shows different pH optima of 6.5, 6.9, and 7.2, respectively. Based upon these findings, a protocol to optimize heparinase immobilization is developed.     

Investigation of the rigid amorphous fraction in Nylon-6

A three-phase model, comprising crystalline, mobile amorphous, and rigid amorphous fractions (χ _c, χ _MA, χ _RA, respectively) has been applied in the study of semicrystalline Nylon-6. The samples studied were Nylon-6 alpha phase prepared by subsequent annealing of a parent sample slowly cooled from the melt. The treated samples were annealed at 110°C, then briefly heated to 136°C, then re-annealed at 110°C. Temperature-modulated differential scanning calorimetry (TMDSC) measurements allow the devitrification of the rigid amorphous fraction to be examined. We observe a lower endotherm, termed the ‘annealing’ peak in the non-reversing heat flow after annealing at 110°C. By brief heating above this lower endotherm and immediately quenching in LN₂-cooled glass beads, the glass transition temperature and χ _RA decrease substantially, χ _MA increases, and the annealing peak disappears. The annealing peak corresponds to the point at which partial de-vitrification of the rigid amorphous fraction (RAF) occurs. Re-annealing at 110°C causes the glass transition and χ _RA to increase, and χ _MA to decrease. None of these treatments affected the measured degree of crystallinity, but it cannot be excluded that crystal reorganization or recrystallization may also occur at the annealing peak, contributing to the de-vitrification of the rigid amorphous fraction. Using a combined approach of thermal analysis with wide and small angle X-ray scattering, we analyze the location of the rigid amorphous and mobile amorphous fractions within the context of the Heterogeneous and Homogeneous Stack Models. Results show the homogeneous stack model is the correct one for Nylon-6. The cooperativity length (ξ_A) increases with a decrease of rigid amorphous fraction, or, increase of the mobile amorphous fraction. Devitrification of some of the RAF leads to the broadening of the glass transition region and shift of T _g.     

碱金属沉积对Mn-Ce/TiO_2低温SCR催化剂性能影响

采用溶胶凝胶法制备了Mn-Ce/TiO_2低温SCR催化剂,考察了碱金属浓度与种类对催化剂活性的影响,探究了不同反应条件下钠盐沉积对活性保留分率的影响,利用SEM、BET、XRD和FT-IR对催化剂碱金属中毒原因进行了分析。结果表明,碱金属毒化后催化剂脱硝活性下降,钾中毒催化剂失活程度高于钠中毒的催化剂,2%钾中毒催化剂在160℃时NO去除率为62.0%,较新鲜催化剂下降29.2%。这主要因为碱金属毒化造成催化剂比表面积明显减小,且催化剂载体锐钛矿型TiO_2部分转化为金红石型,BET和SEM表征均说明碱金属沉积堵塞了催化剂表面的微孔。碱金属对Mn-Ce/TiO_2催化剂活性保留分率的影响表明,催化剂的颗粒粒径对其活性保留分率影响不大,碱金属含量减小、温度升高,Mn-Ce/TiO_2催化剂的活性保留分率增加,Na_2SO_4和NaCl对Mn-Ce/TiO_2催化剂的脱硝活性抑制作用大于KNO_3。     

Anxiolytic potency of iridoid fraction extracted from Valeriana jatamansi Jones and its mechanism: a preliminary study

Valeriana jatamansi Jones (V. jatamansi) has been widely used for treating anxiety and its mechanism involves many aspects including GABA level. This study aimed to evaluate the anxiolytic potency of an iridoid fraction extracted from the radix and rhizomes of V. jatamansi. The iridoid fraction was extracted by using D101 resin; its major components were analysed preliminarily by thin layer chromatography, ultraviolet spectrophotometry and high-performance liquid chromatography; and its anxiolytic effects at 6 mg/kg (low-dose), 9 mg/kg (medium-dose) and 12 mg/kg (high-dose) were evaluated using the elevated plus maze test, the light–dark box test, the Vogel’s drinking conflict test, and the open field drink test. Its action mechanism was investigated using the ELISA. This study provided evidence on the anxiolytic potency of the iridoid fraction from V. jatamansi and revealed its action mechanism of regulating the GABA level.     

微泡对高强度聚焦超声声压场影响的仿真研究*

微泡对高强度聚焦超声(HIFU)治疗焦域具有增效作用,而HIFU治疗中不同声学条件下微泡对HIFU形成声压场的影响尚不清楚。本文基于气液混合声波传播方程、Keller气泡运动方程、时域有限差分(FDTD)法和龙格-库塔(RK)法数值仿真研究输入声压、激励频率、气泡初始空隙率和气泡初始半径对HIFU形成声压场的影响。研究结果表明,随着输入声压的增大,焦点处声压升高但焦点处最大声压与输入声压的比值减小,焦点位置几乎不变;随着激励频率和气泡初始半径的增大,焦点处声压升高且焦点位置向远离换能器方向移动;随着气泡初始空隙率的增大,焦点处声压降低且焦点位置向换能器方向移动。